Installation Instructions

Shower Shelf / Towel Bar Shelf

1) Place each shelf bracket BEHIND  towel bar, one at a time.

2) TWIST toward the front to take the position shown in photo at left.

3) The brackets will TIGHTEN against wall and towel bar as you twist in place.

4) DO NOT REMOVE THE ADJUSTERS attached to each bracket. 

5) The attached 'Adjusters' are loose on each bracket and will BEND and adjust to the towel bar shape and distance to wall.

6) ONLY if the shelf brackets are TOO TIGHT to be installed, remove the 'Adjusters' and re-install the brackets

7) The shelf brackets should be TIGHT on the wall and towel bar when installed properly.

8) Slide the bracket to each end of the towel bar.

9) Place the Towel Bar Shelf above the installed brackets and SNAP DOWN on to the bracket tabs CLOSEST TO THE WALL first.

10) PRESS DOWN on the FRONT of the shelf, engaging the tabs to the shelf on the front of each bracket.

11) When installed properly, the shelf and brackets should be FIRMLY IN PLACE on the towel bar and between the wall.

Shower Door Shelf

1) Place each shelf bracket BEHIND  shower door bar, one at a time.

2) TWIST toward the front to take the position shown in photo at left.

3) The brackets will TIGHTEN against shower door and bar as you twist in place.

4) DO NOT REMOVE THE ADJUSTERS attached to each bracket. 

5) The attached 'Adjusters' are loose on each bracket and will BEND and adjust to the shower bar shape and distance to door.

6) ONLY if the shelf brackets are TOO TIGHT to be installed, remove the 'Adjusters' and re-install the brackets

7) The shelf brackets should be TIGHT on the door and shower bar when installed properly.

8) Slide the bracket to the position on the shower bar where you want the shelf.

9) Snap the partitions on, SMALLEST PARTITIONS at ends of the shelf and the three larger partitions wherever you wish in between.

10) SNAP the shelf retainer bar in place on top of the partitions.

11) Place the Shower Door Shelf above the installed brackets and SNAP DOWN on to the bracket tabs CLOSEST TO THE SHOWER DOOR first.

12) PRESS DOWN on the FRONT of the shelf, engaging the tabs to the shelf on the front of each bracket.

13) When installed properly, the shelf and brackets should be FIRMLY IN PLACE on the shower door.